Loading ...
Loading ...
Loading ...
8
Childproof lock and pause function
■ You can use the childproof lock to prevent children from
switching on the hotplates.
■ The pause function allows you to interrupt the heating
process.
Caution!
Water used for cleaning, spilt food and objects placed on the
@ symbol can cause the childproof lock/pause function to be
unintentionally activated or deactivated.
Childproof lock
Locking the hob
Switch off all hotplates. Within a minute, touch the
I symbol
until the indicator lamp above the symbol lights up. This takes
approx. 4 seconds. The indicator lamp goes out after approx.
10 seconds.
Releasing the lock
Switch on a hotplate. Touch the
I symbol until the indicator
lamp goes out. This takes approx. 4 seconds. The hob is
unlocked.
Locked hob
If you set a hotplate on a locked hob, the following occurs:
■ ‹ flashes in the hotplate indicator, or the residual heat
indicator alternates with
‹.
■ The indicator lamp next to the I symbol lights up.
Switch the hotplate off. Release the lock.
Note: The residual heat is displayed, even when the hob is
locked.
Shortening the switch-on time
You can shorten the switch-on time of the childproof lock from
4 seconds to 1 second:
The hotplates must be switched off.
1.Set all 4 hotplates to heat setting 2.
2.Switch off the hotplates one after the other from right to left.
3.Select a heat setting for any hotplate and press the hotplate
control.
4.Switch off the hotplate control.
All displays light up briefly. The switch-on time is shortened.
You can also increase the switch-on time to 4 seconds again.
Proceed in exactly the same way as for shortening it.
Pause function
Activating the pause function
Tap the
I symbol. The selected heat setting flashes on the
hotplate indicator. Heating is interrupted.
Continuing cooking
Tap the
I symbol again within 3 minutes. The hotplates
continue to heat.
Pause time exceeded
After 3 minutes, a
‹ flashes in the display. Switch the hotplate
off and make your settings again.
Automatic time limit
If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
‹ flashes in the hotplate indicator.
Switch the hotplate off.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Note: You can switch the hotplate back on again at any time.
Cleaning and care
The information in this section provides help on how best to
care for your hob.
Suitable maintenance and cleaning products can be purchased
from the after-sales service or in our e-Shop.
Ceramic
Clean the hob after each use. This will prevent spills from
burning onto the ceramic.
Only clean the hob when it has cooled down sufficiently.
Use only cleaning agents which are suitable for ceramic. Follow
the cleaning instructions on the packaging.
Never use:
■ Undiluted washing-up liquid
■ Detergent intended for dishwashers
■ Scouring agents
■ Harsh cleaning agents such as oven spray or stain remover
■ Abrasive sponges
■ High-pressure cleaners or steam jet cleaners
Ground-in dirt can be best removed with a glass scraper,
available from retailers. Please note the manufacturer's
instructions.
You can also obtain a suitable glass scraper from our after-
sales service or from the e-Shop.
Hob surround
To prevent damage to the hob surround, please observe the
following instructions:
■ Use only warm, soapy water.
■ Do not use harsh or abrasive agents.
■ Do not use the glass scraper.
Loading ...
Loading ...
Loading ...