Loading ...
Loading ...
Loading ...
Aboutthe temperaturecontrols, vvww.GEAppliances.com
I
I
The temperature controls are preset in the factory at 37°1:for the
refrigerator compartment and O°Ffor the freezer compartment. Allow
24 hours for the temperature to stabilize to the preset recommended
settings.
The temperature controls can display both the SET temperature
as well as the actual temperature in the refrigerator and freezer. The
actual temperature may vary slightly from the SET temperature based
on usage and operating environment.
Setting either or both controls to OFFstops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
NOTE: Therefrigerator is shipped with protective film covering the
temperature contre/s, if this fi/m was not removed during installation,
remove it now.
Tochangethe temperature,press and release the
WARMERorCOLDERpad.The SETlight _dll come on
and the display _fill sh_)w tile set temperature. To
change tile temperature, tap either the WARMER
or COLDERpaduntil the desired tempevaune is
displayed. Refiigerator temperaUnes can be
a(!justed belween 34°F and 44°F and tile tieezer
tempevaunes can be a(!justed be/ween -6°F and
+6°F.
Once tile desired temperature has been set,
the temperature displ W will return to the actual
retiigerator and fleezer temperatures aher
5 seconds. Several a(!jusunen/s may be required.
Each time you a({just conuols, allow 24 houxs tox tile
retiigerator U)reach the temperature you have set.
Toturn the cooling system off,tap the WARMERpad
fin either the retiigerator or tile fieezer until tile
display shows OFF.Toturn the un# back on, press tile
COLDERpadfin either the refiigerator or fieezer.
The SETlight will ilhmfinate on the side y{xu
selected. Then press the COLDERpad again (on the
side where the SETlight is ilhnninated) and it will go
to the preset poims of O°Fti)rthe fleezer and 37°1:
fin the refiigerator. Setting either or both conuols
to OFFstops cooling in both the fieezer and
refiigerator comparm_en/s, but does not shut
offelecuical power to the refiigerator.
PerformanceAir Flow System
Tile Pedi)rmance Air-Flow System is designed to
maximize temperature conuol in the refiigerator
and fleezer companmen/s. This unique spedal
feature consists of the Air Tower along tile mp and
back w_dlsof the refiigerator and the Air Tunnel on
the bottom portion of the fieezer rear wall. Pladng
fi)od in fiont of the louvers on these components
will not affect pedinmance. Alth{xugh the Air Tower
and the Air Tunnel can be rem{)ved, doing so will
affect temperaUne pevlinmance. (Fox removed
instructions, on-line, 24 hours a day, contact us at
x_w.GEAppliances.com or call 800-GE-CARES. In
Canada, contact us at x_v.geappliances.ca or call
1.800.361.3400. )
Loading ...
Loading ...
Loading ...