25A-26J7783 MTD high wheel line trimmer

User Manual - Page 6

For 25A-26J7783.

PDF File Manual, 40 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Set-Up
3
Gas&OU
NOTE:The engine is shipped without gasoline or oil in the
engine. Running the engine with insufficient oil can cause
serious engine damage and void the engine warranty.
WARNING! Always keep hands and feet clear of
equipment moving parts. Do not use a pressurized
starting fluid. Vapors are flammable.
0il Recommendations
Before starting engine, fill with motor oil, capacity is 600 ml/20
oz. Refer to viscosity chart in Figure 3-1 for oil recommendations.
Do not over-fill. Use a synthetic or non-synthetic 4-stroke, or an
equivalent high detergent, premium quality motor oil certified to
meet or exceed U.S. automobile manufacturer's requirements for
service classification SG, SF. Motor oils classified SG, SF will show
this designation on the container.
SAE 10W-30 is recommended for general, all temperature use. If
single viscosity oil is used, select the appropriate viscosity for the
average temperature in your area from the chart below.
__ 20w
___ 20
__30
40 I!1_
20w40, !Ow50____mllb
I v
15w40, 15w50 _____mlh,
®,
(°C)-300 -200 -!0 ° 0 ° 10° 200 300 400
(°F)-20 ° 0° 200 400 600 800 1000
Figure 34
1. Single Viscosity
2. Multi Viscosity
CAUTION: Do not use non-detergent oil or 2-stroke engine oil. It
could shorten the engine's service life.
NOTE:A 5w30 synthetic oil may be used to improve start ability
for cold weather (temperatures below 400 F).
CheckingOilLevel
NOTE" Be sure to check the oil while on a level surface with the
engine stopped.
1. Remove the oil filler cap/dipstick and wipe the dipstick
clean.
2. Insert the dipstick into the oil filler neck. Turn the dipstick a
1/4 turn into the locked position to fully seat.
3. Remove dipstick. If the level is low, slowly add oil to the
upper limit on the dipstick. See Figure 3-2 inset.
Oil Filler
Cap/Dil
4.
Figure 3=2
Reinsert the dipstick into the locked position before
starting the engine.
NOTE: Do not overfill. Overfilling with oil may cause
smoking, hard starting, spark plug fouling, or oil saturation
of air cleaner.
Loading ...
Loading ...
Loading ...