435 II, 435e II, 440 II, 440e II
EN Operator's manual 2-38
Loading ...
Loading ...
Loading ...
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Introduction
- Maintenance schedule
- Maintenance and checks of the safety devices on the product
- To do a check of the brake band
- To do a check of the chain brake
- To do a check of the front hand guard and the chain brake activation
- To do a check of the throttle trigger and throttle trigger lockout
- To do a check of the chain catcher
- To do a check of the right hand guard
- To do a check of the vibration damping system
- To do a check of the start/stop switch
- To do a check of the muffler
- To adjust the idle speed screw (T)
- To examine if the carburetor is correctly adjusted
- To replace a broken or worn starter rope
- To tighten the recoil spring
- To assemble the starter housing on the product
- To clean the air filter
- To do a check of the spark plug
- To sharpen the saw chain
- To do a check of the saw chain lubrication
- To examine the cutting equipment
- To do a check of the guide bar
- To do maintenance on the fuel tank and the chain oil tank
- Air cleaning system
- To clean the cooling system
- Troubleshooting
- Transportation, storage and disposal
- Technical data
- Accessories
- Declaration of Conformity
