Loading ...
Loading ...
Loading ...
P a g e |
7
web: brohn.com.au
Do not use aluminum anywhere within the oven grills or to cover the grill pan or
wrap heated items under the grill. Aluminum foil is highly reflective and can cause
damage to the grill element.
Do not lift or move appliance by the oven door or handle. This may cause
damage to the appliance or cause injury to the person attempting to lift appliance.
Clean the oven on a regular basis so oils and fats do not accumulate as this can
cause a fire risk. Do not use harsh cleaners or metal scrapers to clean door glass.
Do not steam clean any part of the oven. When cleaning the oven ensure no part
of it is immersed in water or other liquid.
Do not touch hot surfaces. The heating element and other parts inside the oven
become extremely hot. Make sure you take care when handling food and to
always use oven mitts. Keep children well away from the oven.
When opening the oven door, make sure to avoid contact with hot parts of the
oven and steam.
There is a danger of fire when you leave items inside the oven for too long,
especially if an item is left until the the next time of use.
Do not use the appliance with its front door glass removed or broken.
When the door is open, do not place any heavy objects on the door or allow
children to sit on it. You may cause the oven to overturn or the door hinges to be
damaged.
Do not use abrasive cleaners or sharp metal scrapers to clean the glass as the
scratches that may occur on the surface of the door glass may cause the glass to
break.
This appliance is for household use only, do not use it outdoors.
2.5 ELECTRICAL SAFETY
Plug the appliance in a grounded socket protected by a fuse conforming to the
values specified in the technical specifications chart.
Have a licensed electrician set grounding equipment and install the oven. The
warranty will be voided, and the manufacturer won’t be responsible for the
damages occurred due to improper installation and use of the product without
grounding according to the local regulations.
The circuit breaker switches of the oven shall be placed so that end user can reach
them when the oven is installed.
The power supply cord (the cord with plug) shall not be in contact with the hot
parts of the appliance.
The rear surface of the oven also heats up when the oven is operated. Electrical
connections shall not touch the rear surface, otherwise the connections may be
damaged.
Do not tighten the connecting cables to the oven door and do not run them over
hot surfaces. If the cord melts, this may cause the oven to short circuit and increase
risk of a fire.
Unplug the unit during installation, service, maintenance, cleaning and repair.
Cut off all supply circuit connections before accessing the terminals.
Loading ...
Loading ...
Loading ...