Loading ...
Loading ...
Loading ...
Audio:
When the power is on, you can connect the MP3 wire to audio device to play music. When the
treadmill powers down and enters sleep mode, the music will stop. Pressing any button will
reactivate the treadmill.
USB Interface:
USB connection can only charge your device. It cannot be used to play music.
Metric/Imperial Unit Change:
Remove the Safety Key (No. 128). Press and hold Start button, then reconnect the Safety
Key (No. 128). Keep holding the Start until all the display functions light up then release.
Press either side of the handrail buttons to select Metric or Imperial system ("SI" signifies Metric
system and "Eng" signifies Imperial system). After selecting, press the Start button to confirm
and return to standby mode.
Safety Key Function:
In all mode, pulling off the Safety Key (No. 128) can stop the treadmill from running immediately.
When the treadmill stops immediately, the treadmill will make a beeping noise and the display panel
displays “SAFE”. At this moment, you cannot operate the treadmill except to turn it off. Insert the
Safety Key (No. 128) again and the treadmill will be in standby mode.
Incline Self-Adjustment:
At the standby state, press Stop and Speed 5 to do a self-adjustment. After adjusting,
you can return to standby state.
Power Saving Mode:
This system has power saving function in the standby mode. If there is no button command input
within 4 minutes, the system will enter power saving mode and shut off the display automatically.
Press any button to turn on the system.
Loading ...
Loading ...