Loading ...
Loading ...
Loading ...
USER SERVICING INSTRUCTIONS
CLEANING
Page 8
1. Grasp plug and remove from the
receptacle or other outlet device.
Do not unplug by pulling on cord.
2. Open fuse cover. Slide open fuse
access cover ,that is on top of the plug,
towards blades.
3. Remove fuse carefully. Insert the tip of your tool
into fuse slot (close with the terminal), then pry
the fuse gradually and slowly, but not overexert. If it feels tight,
you can try to pry the fuse little by little. When one side of the
fuse has been pried, then you can get the fuse out entirely.
4. Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
5. Close fuse cover. Slide the fuse access cover back to the closed
position.
6. Risk of fire. Do not replace attachment plug. Contains a safety
device (fuse) that should not be removed. Discard product if the
attachment plug is damaged.
NOTICE:
1. When you replace the fuse, please operate cautiously to avoid
accidental damage.
2. If it is hard to place the new fuse, ensure that the fuse is in the
correct orientation.
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with mild soap and a damp cloth or
sponge. Thoroughly remove soap film with clean water on a cloth
or sponge.
3. Ensure that water or other liquid does not enter inside of the motor.
Loading ...
Loading ...
Loading ...