Loading ...
Loading ...
Loading ...
13
WASH PREPARATION
Fabric Softener
If you wish to use fabric softener we recommend:
z
Using it sparingly. Measure it carefully to ensure you do not fill above the ‘Max’ level
of the dispenser.
z
Using a fabric softener that is of a thinner consistency.
z
Clean the dispenser as soon as the cycle has finished.
z
Clean your washer regularly using the DRUM CLEAN cycle, refer to ‘Caring
for your washer’.
z
Cold water washing increases the chance of scrud build-up occurring. We recommend a
warm or hot wash at regular intervals, eg every 5th wash.
Adding the fabric softener
Always follow the manufacturer’s guidance for the
correct dosage. Measure the softener out into the
cap and pour into the fabric softener dispenser. The
softener will remain in the dispenser until the deep
rinse where water flushes it into the drum.
If you fill beyond the ‘Max’ mark, the fabric softener
will dispense into the drum prematurely and may stain
clothes, and also contribute to scrud.
A small volume of water remaining in the dispenser at
the end of the cycle is normal.
Fabric softener should not be added when
ECO option is selected or for a RINSE cycle. The
softener will not be dispensed.
Where do I put my detergent?
Place your detergent into the detergent dispenser,
located on the left side of the washer. We recommend
that you measure your detergent first.
You will notice that most of the detergent placed in
the dispenser will fall into the washer. As the washer
fills, the dispenser will be flushed of any residue. The
detergent is then mixed with water at the bottom
of the washer, dissolving and activating it to ensure
optimum wash performance.
DO NOT use your washer to soak items in bleach or sanitiser. If you have soaked items in
a bucket, do not tip the contents of the bucket into your washer. The chemicals in these
products are very corrosive to metal surfaces and can damage your washer. Rinse and
wring items out thoroughly before placing them in your washer.
Loading ...
Loading ...
Loading ...