Loading ...
Loading ...
Loading ...
4 − English
CONCRETE MIXER SAFETY INSTRUCTIONS
Always keep the drum’s opening in view when filling
or emptying the tool. Certain mixing substances can
harden quickly and could cause property damage or
personal injury if spilled.
Do not exceed the batch capacity of this tool.
Overfilling the drum could damage the motor.
Inspect tool cords periodically and, if damaged, have
repaired at your nearest authorized service center.
Constantly stay aware of cord location. Following this
rule will reduce the risk of electric shock or fire.
Check damaged parts. Before further use of the
tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other conditions
that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced
by an authorized service center. Following this rule will
reduce the risk of shock, fire, or serious injury.
Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one
heavy enough to carry the current your product
will draw. A wire gauge size (A.W.G.) of at least
14 is recommended for an extension cord 50 feet
or less in length. A cord exceeding 100 feet is not
recommended. If in doubt, use the next heavier gauge.
The smaller the gauge number, the heavier the cord.
An undersized cord will cause a drop in line voltage
resulting in loss of power and overheating.
If the power supply cord is damaged, it must be
replaced only by the manufacturer or by an authorized
service center to avoid risk.
Never leave tool running unattended. Unplug tool when
leaving work area or when tool is out of your line of sight.
Empty and clean the drum prior to transporting the
tool away from the work area or storing the tool for
long periods of time.
Clean and dry the tool after each use.
Dispose of concrete, rinse water, and other substances
in areas designated for that purpose. Local, state or
federal laws may prohibit disposal of these materials
in storm drains, roadsides, landfills, or other locations.
Consult your local waste authority for information
regarding available disposal options.
This product is not designed to be towed behind a
vehicle.
When hauling the tool in a vehicle, securely tie it down
to prevent movement and possible damage.
Save these instructions. Refer to them frequently and
use them to instruct other users. If you loan someone this
product, also loan these instructions.
Loading ...
Loading ...
Loading ...