Loading ...
Loading ...
Loading ...
12 − English
Pull the lock handle away from the pivot bracket and
place it in the locked position.
Slowly release the lock handle and allow it to enter the
hole in the motor assembly that is closest to the motor.
Insert the pivot pin through the holes in the pivot bracket
and the motor assembly and secure it with the hitch pin.
Fig. 10
Fig. 11
HANDLES
ASSEMBLY
LOCKED POSITION
UNLOCKED POSITION
ATTACHING THE HANDLES
See Figure 11.
Locate the following parts:
Handle .......................................................................... 2
Hitch Pin (Large) in plastic bag (E) ................................ 2
Slide a handle through one of the openings at the rear of
the motor assembly and onto the bracket at the front of
the assembly.
NOTE: Position the handle so the notches in the handle
slide onto the notches on the bracket.
Install a hitch pin into the hole in the handle to secure it
in place. Press down firmly on the hitch pin and make
certain it is secure.
Repeat the process to secure the second handle.
HITCH
PIN
HITCH
PIN
NOTCH
LOCK
HANDLE
LOCK
HANDLE
HOLE
OPENING
NOTCHES
Loading ...
Loading ...
Loading ...