Loading ...
Loading ...
Loading ...
5
Temperature regulator
ON/OFF button
4.1 Switching on
1. Insert the plug into the wall socket.
2. Touch the temperature regulator button if
all LED indicators are off.
4.2 Switching off
Keep touching the temperature regulator
button for 3 seconds.
All indicators light off.
4.3 Temperature regulation
To operate the appliance, touch the
temperature regulator until the LED
corresponding to the required temperature
lights up. Selection is progressive, varying
from 2°C to 8°C. Recommended setting is
4°C.
1. Touch temperature regulator.
Current temperature indicator blinks. Any
time you touch the temperature regulator, the
setting moves by one position. The
corresponding LED blinks for a while.
2. Touch the temperature regulator until the
required temperature is selected.
The set temperature will be reached
within 24 hours. After a power failure the
set temperature remains stored.
4.4 Frostmatic function
The Frostmatic function is used to perform
pre-freezing and fast freezing in sequence in
the freezer compartment. This function
accelerates the freezing of fresh food and, at
the same time, protects food products already
stored in the freezer compartment from
undesirable warming.
To freeze fresh food activate the
Frostmatic function at least 24 hours
before placing the food to complete pre-
freezing.
To activate Frostmatic function press the
Frostmatic button. The Frostmatic indicator
switches on.
This function stops automatically after 52
hours.
It is possible to deactivate the function at any
time by pressing Frostmatic button again. The
Frostmatic indicator switches off.
4.5 Door open alarm
If the fridge door is left open for
approximately 5 minutes, the alarm light
flashes and the sound is on.
During the alarm the sound can be muted by
pressing any button. The sound switches off
automatically after around one hour to avoid
disturbing.
The alarm deactivates after closing the door.
4.6 High temperature alarm
When there is a temperature increase in the
freezer compartment (for example due to an
earlier power failure), the alarm light flashes
and the sound is on.
To deactivate the sound press any button.
The alarm light continues to flash until the
normal conditions are restored.
If you do not press any button, the sound
switches off automatically after around one
hour to avoid disturbing.
5. DAILY USE
5.1 Positioning the door shelves
To permit storage of food packages of
various sizes, the door shelves can be placed
at different heights.
1. Gradually pull the shelf up until it comes
free.
2. Reposition as required.
10 ENGLISH
Loading ...
Loading ...
Loading ...