Loading ...
Loading ...
Loading ...
Strength Training Collection 9 8 IntensiFlex User Manual Lifepro
5-MINUTE ASSEMBLY GUIDE
ATTACH THE FEET
TO THE BASE
1. Gather the base (A) and four non-slip feet (D).
2. Slide a foot onto each end of the base. See Figure 1.
a. The flat round side of the foot rests on the floor.
Figure 1
D
A
FRONT
1
ATTACH THE ADJUSTMENT POST
TO THE BASE
1. Gather the adjustment post (C), two sets of hardware (one M8×75mm
bolt, two washers, and one nut) (F), and two wrenches (G).
2. Remove the washers and nut from each bolt.
3. Align the two screw holes in the base of the adjustment post with the
holes in the top of the base.
4. Place a large washer onto one of the bolts.
5. Insert the bolt through a screw hole from the BOTTOM. See Figure 2.
6. Place a small washer and nut onto the end of the bolt and tighten the
nut with your fingers.
7. Repeat steps 4–6 above to insert the second bolt.
8. Use a wrench to fully tighten both nuts.
2
Figure 2
Height-Adjustment
Holes
F
C
FRONT
Bolt Head
Nut
Small Washer
Large Washer
Loading ...
Loading ...
Loading ...