Hoshizaki KMS830MLJ KMS-830MLJ 30" Serenity Series Cuber Ice Machine with 885 lbs. Daily Ice Production, H-Guard Plus, EverCheck Alert System, and Stainless Steel Evaporator, in Stainless Steel

Instruction Manual - Page 22

For KMS830MLJ.

PDF File Manual, 34 pages, Read Online | Download pdf file

KMS830MLJ photo
Loading ...
Loading ...
Loading ...
22
1. Icemaker
Icemaker Water
Supply Inlet
Minimum Icemaker
Water Supply Line Size
Icemaker Drain
Outlet
Minimum Icemaker
Drain Line Size
1/2" Female Pipe
Thread (FPT)
1/4" Nominal ID
Copper Water Tubing or
Equivalent
3/4" Female Pipe
Thread (FPT)
3/4" Nominal
ID Hard Pipe or
Equivalent
An icemaker water supply line shut-off valve and drain valve must be installed.
• Be sure there is sufficient extra water supply line and drain line for the appliance to be
pulled out for service.
Fig. 12
KMS-830MLH
Icemaker Water
Supply Inlet
1/2" FPT
Icemaker Water Supply
Line Shut-Off Valve
Icemaker Water Supply
Line Drain Valve
Icemaker Drain
Outlet 3/4" FPT
Icemaker Condensation
Drain Outlet
3/8" OD Hard Tube
Bin Drain Outlet
3/4" FPT
Separate piping to approved
drain. Leave a 2-inch (5-cm)
vertical air gap between the
end of each pipe and the drain.
2-inch
(5-cm)
air gap
Floor
Drain
Ice
Storage
Bin
Icemaker
Vent Tube
Minimum 1/4" Nominal ID
Copper Water Tubing
Minimum 3/4" Nominal ID Hard Pipe
Vent Tube
Loading ...
Loading ...
Loading ...