Loading ...
Loading ...
Loading ...
www.welbilt.com 800-225-9916 37
Step 3 – Power on controllers.
Step 4 – Change ModBus address on each controller.
Press and hold the button to access the Setpoints menu.
tS is displayed.
Then use the arrow until you see Adr (Address).
Press and the current address is displayed (default =1)
Change the address by pressing the or arrow to change the value. Use the
button to move to the next digit. Available addresses are 2-247.
When address is set to the preferred value (ex. 123), press and hold for 3
seconds to save the address.
Loading ...
Loading ...
Loading ...