Loading ...
Loading ...
Loading ...
6 BISSELL.com BISSELL.com 7
Problem Possible Cause Remedies
Reduced/
no spray
Clean water tank may be empty. Refill tank.
Clean water tank may not be
completely seated.
Turn power OFF. Remove and reseat tank.
Pump may have lost prime. Hold end of hose below water level in tank
to prime.
Loss of
suction
power
Tanks may not be completely seated. Turn power OFF. Remove and reseat both
tanks.
Dirty water tank is full. Empty tank.
Troubleshooting
If you don’t see the issue you’re experiencing below, visit BISSELL.com.
1. Empty dirty water tank
when water reaches the
“FULL” line
2. Remove dirty water tank
and carry to disposal area.
3. Unlock by rotating the
handle up and over the back of
the tank.
4. Remove lid and pour out
dirty water. Rinse out tank to
remove any debris.
5. Replace the tank lid and
rotate the handle forward to
lock back into place.
6. Before placing tank back
into the machine, remove any
debris from the red filter.
7. Remove tool from end of
hose. Press the tool nozzle
release button to clean further.
Note: Select tool nozzles can
be removed.
8. Remove and rinse the tools
under clean, running water.
Allow tools to dry.
9. Wrap and secure the flex
hose and power cord.
NOTICE To reduce the risk of a leaking condition, do not store where freezing may occur. Damage to internal
components may result.
After-Cleaning Care
Go to BISSELL.com for how-to videos.
Storing Your Machine
Store machine in protected, dry area at room temperature (40° F - 110° F).
WARNING To reduce the risk of electric shock, turn power OFF and disconnect from electrical outlet before
performing maintenance or troubleshooting.
WARNING To reduce the risk of electric shock, turn power OFF and disconnect from electrical outlet before
performing maintenance or troubleshooting.
Loading ...