Loading ...
Loading ...
Loading ...
Before using for the first time
22
Con@ctivity via a direct WiFi connec-
tion (Con@ctivity3.0)
Prerequisite: WiFi-enabled Miele
cooker hood
You can find the necessary informa-
tion on connecting the cooker hood in
the associated operating and installa-
tion instructions.
Switch the hob on.
Place an induction-compatible item
of cookware on the hob.
Touch and hold the0 and 7 sensor
controls on the numerical display at
the same time for 6seconds.
The seconds can be seen counting
down in the timer display. After the time
has elapsed, a progress light appears in
the timer display during the connection
attempt. If the connection was success-
ful, the code: appears in the timer
display. If the connection could not be
established, the timer display will show
the code:. Repeat the steps above.
When successfully connected, dis-
plays2 and 3 will light up constantly on
the cooker hood.
Quit connection mode on the cooker
hood by pressing the run-on but-
ton.
Con@ctivity is now activated.
With a direct WiFi connection, it is not
possible to connect the hob and the
cooker hood to a home network. If this
is desired later, the direct WiFi con-
nection between the hob and the
cooker hood must first be reset (see
“Initial commissioning – Con@ctivity”
and “Disconnecting the WiFi” in the
operating and installation instructions
for the cooker hood).
Loading ...
Loading ...
Loading ...