Loading ...
Loading ...
Loading ...
DJI Mavic 3E/3T User Manual
31
©
2022 DJI All Rights Reserved.
Stopping the Motors Mid-Flight
Stopping motors mid-flight will cause the aircraft to crash. The motors should only be
stopped mid-flight in an emergency situation, such as if the aircraft is involved in a collision,
a motor has stalled, the aircraft is rolling in the air, or the aircraft is out of control and is
ascending or descending very quickly. To stop the motors mid-flight, perform the same CSC
that was used to start the motors. The default setting can be changed in DJI Pilot 2.
Flight Test
1. Place the aircraft in an open, flat area with the aircraft rear facing towards you.
2. Power on the remote controller and the aircraft.
3. Launch DJI Pilot 2 and enter the camera view.
4. Wait for the aircraft self-diagnostics to complete. If DJI Pilot 2 does not show any
irregular warning, you can start the motors.
5. Push the throttle stick up slowly to take off.
6. To land, hover over a level surface and gently push the throttle stick down to descend.
7. After landing, push the throttle down and hold. The motors will stop after three seconds.
8. Power off the Intelligent Flight Battery before the remote controller.
Make sure to place the aircraft on a flat and steady surface before takeoff. DO NOT
launch the aircraft from your palm or while holding it with your hand.
Loading ...
Loading ...
Loading ...