Loading ...
Loading ...
Loading ...
ENGLISH10
Installation Requirements
What is in the box
Hood assembly (1) Hardware bag (1) Side spacers (2)
Filters
30" (2)
36" (2)
48" (3)
Product literature (2) Drip trays
30” (2)
36” (2)
48” (3)
Tools and parts
Removing the packaging.
CAUTION
Remove carton carefully, Wear gloves to protect against
sharp edges.
WARNING
Remove the protective lm before putting into operation.
Parts supplied
• Hardware bag includes:
Part # Qty
5 x 45 mm
4
3.5 x 6.5 mm
6
Ø 6.4 x 18 mm washers
4
CFM reduction wire
(1) 36"
(1) 48"
Parts not supplied
Tools/Materials required
• Level
• Drill with 1 ¼” (3.2 cm) and ⅛” (3 mm) drill bits
• Pencil
• Wire stripper or knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw
• Metal snips
• Screwdrivers:
- Phillips
- Flat - blade
Parts needed
• Home power supply cable
• ½” (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• Metal vent system
Loading ...
Loading ...
Loading ...