Loading ...
Loading ...
Loading ...
Recheck Rear-
Facing Level Line
Redo the installation
if the car seat is not
reclined correctly for
your child.
Check Belt Tightness
Hold the Rear-Facing Belt
Path with your non-dominant
hand. Push and pull the car
seat from side to side.
It should not move more than
1 in. (2.5 cm).
Secure Child in
Car Seat
See page 29-31.
15
16
Only if necessary, you
may place a tightly
rolled towel(s) or foam
pool noodle(s) under
the front of the car seat
base to help make the
Rear-Facing Level
Line
parallel with the
ground.
Check often to make
sure padding is still in
place and the belt is
tight.
If the car seat
moves more than 1 in.
(2.5 cm), you can try:
• Pulling the belt
tighter; OR
• Reinstalling the car
seat; OR
• Changing to a
different seating
location; OR
• Switching to a
different install
method (LATCH or
vehicle belt).
continued on next page
Adjust Footrest
Use one of the 3 Rear-Facing footrest positions to put
the footrest as fl ush against the vehicle seat as possible.
The footrest does not need to touch the back of the
vehicle seat; there can be a small gap.
Rear-Facing Mode
Footrest Use
For more information
about using the
footrest, see page 49.
8 9 10 11
1A
1B
1C
Loading ...
Loading ...
Loading ...