Loading ...
Loading ...
Loading ...
Head Pillow & Body Pillow
Only For Use in
Rear-Facing Mode
The head and body pillows
must be used together.
To remove head pillow, pull
it out from behind the body
pillow.
To remove body pillow, undo
the buckle and pull it through
the slot in the pillow. Slide the
pillow out from behind the
harness straps.
If using the lower shoulder
harness slots for smaller
infants, see page 45-47.
3
4
Accessory Use
Removable Cup Holder(s),
Snack Lid, & Snack Tray
(on select models)
For Use in All Modes
The cup holder(s), snack lid,
and snack tray are top-rack
dishwasher safe.
To remove cup holder, twist the
cup holder counterclockwise. Pull
it out of the slot in the car seat.
To remove snack lid, pull it off
the top of the cup holder.
To remove snack tray, locate
the 2 tabs underneath of the
snack tray. Squeeze them
together and lift the snack tray
out of the slot in the car seat.
Buckle Cover
For Use in Rear-Facing Mode or
Forward-Facing Mode
To remove, undo the buckle and pull
the buckle cover off the buckle.
Easy Out Harness Covers
(on select models)
For Use in Rear-Facing Mode or
Forward-Facing Mode
If the harness covers will not allow
proper positioning of the chest clip or
interfere with getting a tight enough
harness fi t for a smaller baby, remove
them and DO NOT use.
Store them until your child is large
enough to use the harness covers while
maintaining a properly fi tting harness.
Front
Back
Snack Tray
Cup Holder
To remove, undo the fasteners on
the headrest pad. Pull the fastening
strips on the covers apart. Slide
the covers out from behind the
headrest pad.
To install, undo the fasteners on
the headrest pad. With the back of
the harness covers facing you, slide
them behind the headrest pad. Fold
harness covers down towards you.
Place the harness straps into the
covers. Fasten the harness covers.
Loading ...
Loading ...
Loading ...