Broan B5736SS Convertible Arched Canopy Wall-Mount Chimney Range Hood

Installation Instructions - Page 2

For B5736SS. Also, The document are for others Broan models: B5630SS, B5636SS, B5730SS

PDF File Manual, 28 pages, Read Online | Download pdf file

B5736SS photo
Loading ...
SR - N
MODELS B5630SS B5636SS B5730SS B5736SS
INSTALL THE DUCTWORK Page2
(Ducted Hoods Only) PREPARE THE HOOD
1. Decide where
the ductwork
will run
between the
hood and the
outside.
2. A straight, short
duct run will
allow the hood
to perform most
efficiently.
3. Long duct
runs, elbows
and transitions
will reduce the
performance of
ROOF CAP
\
6"
DUCT
HOOD
DECORATIVE
FLUE
30"TO 36"ABOVE
COOKING SURFACE
ROUND
ELBOW
the hood. Use as few of them as possible. Larger ducting
may be required for best performance with longer duct runs.
4. Install wall cap or roof cap. Connect round metal ductwork
to cap and work back towards the hood location. Use duct
tape to seal the joints between ductwork sections.
MEASURE THE INSTALLATION
ROOF CAP
/
__'_"'_ _ ROUND ELBOW
6ROONDDUOT --fl
_ WALL CAP
r-F,/
DECORATIVE FLUE _ I _3_,.- m \ HOOD MOUNTING
_ _ _ .J_'/ BRACKET
HOOD II I I t
I_---_ 12 1/2" TO CENTER
3%" -- _ , "
-'- t
30" TO36"ABOVE
COOKING SURFACE *
I
Unpack hood and check contents. You should receive:
1 - Hood
1 - Glass Canopy (Models B5630SS & B5636SS)
1 - Metal Canopy (Models B5730SS & B5736SS)
1 - Decorative Flue Assembly
1 - Damper / Duct Connector
1 - Lower Flue Mounting Bracket
1 - Upper Flue Mounting Bracket
1 - Hood Mounting Bracket
2 - Aluminum Grease Filters (installed in hood)
1 - Parts Bag containing:
8 - Mounting Screws (#8 x 3/8" Pan Head)
7 - Mounting Screws (#8 x 1-1/2" Flat Head)
4 - Mounting Screws (M4 x 1.0 Flat Head)
7 - Drywall Anchors
2 - Washers
4 - Decorative Washers
1 - Installation Manual
J
DECORATIVEFLUE
DAMPER/ DUCT
CONNECTOR
_(_M OUNTING
CREWS
4X 1.0"
at Head)
7MOUNTING
SCREWS
(#8X 1-1/2"
FlatHead)
FLUEMOUNTING
BRACKET
8 MOUNTING
SCREWS
(#8 x 3/8"
Pan Head)
2 WASHERS
7 DRYWALL
ANCHORS
4 DECORATIVE
WASHERS
LOWER
FLUE MOUNTING
BRACKET
HOOD
MOUNTING
BRACKET
The minimum hood distance above cooktop MUST NOT BE
LESS than 30".
A maximum of 36" above cooktop is highly recommended for
best capture of cooking impurities.
Distances over 36" are at the installer and users discretion;
providing that the ceiling height permits.
Loading ...
Loading ...
Loading ...