Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 219
Four-Pin Connector
Seven-Pin Connector
Trailer Light Check
This feature will run the trailer lights through a
se
quence to check the trailer light function. It is
available in the instrument cluster under the
Trailer Tow menu
Ú page 105.
When activated the feature will enable all of the
e
xterior lights sequentially for up to five minutes
for time to walk around and verify functionality. The
following exterior lights will remain on for the
entirety of the sequence:
Park/Running Lamps
Side Marker Lamps (if equipped)
License Lamp
Signature Lamp (if equipped)
Low Beams
Fog Lamps (if equipped)
Daytime Running Lamps
During this time the following lights will sequence,
ea
ch activating for three seconds:
1. Brake and CHMSL (third brake light)
2. Le
ft turn signal
3
. Right turn signal
4
. Reverse Lamps
5
. Hi
gh Beam
T
his light check sequence will continue for a total
of
five minutes.
The sequence will only activate if the following
conditions are met:
Vehicle is equipped with the Trailer Tow
Package
Vehicle is in PARK
Vehicle is not in motion
Ignition in ACC or ON/RUN
Remote start is inactive
Brakes are not applied
Left turn signal is not applied
Right turn signal not applied
Hazard switch is not applied
1 — Ground
2 — Park
3 — Left Stop/Turn
4 — Right Stop/Turn
1 — Backup Lamps
2 — Running Lamps
3 — Left Stop/Turn
4 — Ground
5 — Battery
6 — Right Stop/Turn
7 — Electric Brakes
4
Loading ...
Loading ...
Loading ...