Loading ...
Loading ...
Loading ...
202 STARTING AND OPERATING
Deactivation
The system is deactivated in the following
con
ditions if it was activated
automatically:
When the vehicle is shifted out of REVERSE with
camera delay turned on, the camera image will
continue to be displayed for up to 10 seconds,
unless the vehicle speed exceeds 8
mph
(1
3 km/h), the vehicle is shifted into PARK or
th
e ignition is placed in the OFF position. There
is a touchscreen X button to disable the display
of the camera image.
When the vehicle is shifted out of REVERSE with
camera delay turned off, the Surround View
Camera mode is exited and the last known
screen appears again.
The system is deactivated in the following
conditions if it was activated
manually from the
Uconnect controls menu via the Surround View
button, Back Up Camera button, Cargo Camera
button or Forward Facing Camera button:
The X button on the display is pressed
Vehicle is shifted into PARK
Ignition is placed in the OFF position
Vehicle speed is over 8 mph (13 km/h) for
10 seconds
NOTE:
If the Surround View Camera, Cargo Camera, Back
Up
Camera, or Forward Facing Camera is activated
manually, and the vehicle is shifted into REVERSE,
deactivation methods for automatic activation are
assumed.
The camera delay system is turned off manually
th
rough the Uconnect Settings menu Ú page 229.
NOTE:
If snow, ice, mud, or any foreign substance
builds up on the camera lenses, clean the
lenses, rinse with water, and dry with a soft
cloth. Do not cover the lenses.
If a malfunction with the system has occurred,
see an authorized dealer.
Cargo Camera With Dynamic Centerline —
If Equipped
The Dynamic Centerline feature provides an
ov
erlay on the Cargo Camera display screen that
aligns to the center of the pickup box to aid in
hooking up a fifth wheel camper or gooseneck
trailer. The centerline auto aligns to the center of
the pickup box, and can also be manually adjusted.
The centerline will adjust in response to steering
angle inputs, and will not obstruct the gooseneck
receiver or an approaching trailer gooseneck in the
camera feed.
Activation
The Dynamic Centerline feature can be activated
th
rough the Uconnect settings by pressing the
Cargo Camera button, followed by the Dynamic
Centerline button on the touchscreen.
If the Dynamic Centerline feature is turned on, the
ove
rlay will display anytime the Cargo Camera
image is displayed.
Adjusting Centerline
Refer to the following steps to manually adjust the
c
enterline:
1. Press the Adjust Centerline button located in
the bottom right corner of the Cargo Camera
display.
2. Use the arrows on the bottom left corner of the
C
argo Camera display to adjust the centerline
horizontally or vertically.
3. Once the desired position is achieved, press
t
he Accept button to set the centerline to the
newly specified position.
Deactivation
The Dynamic Centerline feature will automatically
b
e deactivated whenever the Cargo Camera
display is deactivated. It can also be manually
deactivated through the Uconnect Settings.
Cargo Camera Zoom View
When the Cargo Camera image is being
displayed, and the vehicle speed is below
8
mph (13 km/h) while in any gear
se
lector position, Zoom View is available.
By pressing the “magnifying glass” icon in the
upper left of the display screen, the image will
Loading ...
Loading ...
Loading ...