Loading ...
Loading ...
Loading ...
9 Trouble-shooting
Discarding the rinsing solution
▸ When the corresponding message appears in the display: remove the water tank,
pour the rinsing solution away and fill it with 1l warm water.
▸ Put the water tank back.
– The rinsing phase starts automatically.
– The following appears in the display: «Rinsing appliance.»
▸ Repeat the procedure as often as required by the appliance.
As the water is heated up during final rinsing, the appliance door may steam up.
Ending the descaling process
▸ As soon as the corresponding message appears: remove, empty and dry the water
tank.
▸ Confirm the message with «OK».
– The following appears in the display: «Appliance was descaled successfully.»
▸ Confirm the message with «OK».
– The appliance is ready for operation again.
▸ Wipe up any water in the bottom of the cooking space with a soft cloth.
After descaling, if the , , or application is used the water that is
pumped back into the water tank at the end of cooking may be cloudy. This will
not affect the cooking or baking characteristics nor the quality of the food being
cooked or baked.
9 Trouble-shooting
You may be able to trouble-shoot the following malfunctions yourself. If not, note down
the error message in full (message, F and E numbers) and call Customer Services.
9.1 Error messages
Message Possible cause Solution
▪ «FX/EXX» ▪ Various situations can
lead to an error mes-
sage.
▸ Acknowledge the error message by
touching «OK».
▸ Switch the power supply off for about
1 minute.
▸ Switch the power supply back on.
▸ If the error appears again, note down
the error message in full along with
the serial number (SN) of the appli-
ance (see page 66).
▸ Disconnect from the power supply.
▸ Contact Customer Services.
61
Loading ...
Loading ...
Loading ...