Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
14
2 Inserting the Glass
Insert the glass assembly made in step 1 into the ridge on the top of the re
table mantel.
OPERATION
Before performing a leak test, be sure that no sparks can occur and you are in a
spacious outdoor area. Connect the propane gas tank to the regulator and turn
the valve on the unit to the “o” position. Brush a soap and water mixture on all
connections. Turn the gas supply on; if bubbles occur on any connection there
may be a leak. If you smell gas or a leak is discovered turn the gas valve o,
disconnect propane gas tank and do not use the appliance until the leak is
repaired.
Do not use the heating unit without inspecting the gas hose. If there are signs of
wear or abrasion you must replace the hose (if applicable). Pumice stones/lava
rocks/LavaGlass could pop up and strike somebody’s face during the process of
lighting this unit; stand away from the unit for the rst 20 minutes after igniting.
Flame height should be a yellow/blue color between 2 - 10 inches in height.
Wait 50 minutes after extinguishing ame prior to placing a lid (if applicable) or
protective cover on heating item.
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Loading ...
Loading ...
Loading ...