Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
12
ASSEMBLY INSTRUCTIONS
•
Please keep this owner’s manual for future reference.
• Do not exceed 1/4” depth of small Lava rock/Glass rocks directly above burner
holes. Applying too many lava rocks may result in unburned gas pooling in the
re bowl. Ventilation is required to allow fresh air in and any residual gas to escape.
• Do not use if lava rocks are wet. Be sure Lava rock/Glass rocks are dry before
lighting as intense heat could cause the rocks to crack.
Carefully remove all items from the carton. Be sure all packaging, both under
the re pit and around the re bowl, is removed before using.
1. Check each part before using the product.
Make sure the gas supply system is turned
“OFF” before assembling. See Figure A.
2. Locate the battery and remove from plastic.
Unscrew the rubber cap of the electric igniter
and place AA battery into the battery case.
Make sure the positive pole "
+" is towards
the cap. Screw the cap back onto the battery
case tightly. See Figure B.
3. Place the Lava rock/Glass rocks evenly in the
re bowl. See Figure C.
WARNING
DO NOT COVER THE IGNITION SCREEN when placing the Lava rock/Glass rocks
into the re bowl. Always keep the ignition screen visible.
A
C
B
SCREEN
CORRECT INCORRECT
Loading ...
Loading ...
Loading ...