Loading ...
Loading ...
Loading ...
HIGH EQ
This High EQ shelving type of active tone control varies the tre-
ble frequencies (+/- 15dB at 12kHz) and is designed to remove
noise or add brilliance to the signal, depending on the quality of
the source.
MID-MORPH® EQ
Where most mid-range controls work at just one frequency, the
Mid-Morph works at two. When turned counterclockwise, it cuts
at 250 Hz to reduce frequencies that muddy the sound. When
turned clockwise, it boosts at 4 kHz to add intelligibility to
vocals. Either way, improved vocal or instrument denition can
be achieved.
LOW EQ
A shelving type of EQ that varies the bass frequency levels (+/-
15dB at 80Hz). Low EQ adds depth to thin-sounding signals or
cleans up the muddy ones. As with any EQ, use sparingly. Too
much of this EQ can give you a booming bottom end.
EFX - DIGITAL EFFECTS
This control adjusts the level of the channel signal added to the
eects mix. The signal is sent to the internal eects processor.
Turning the knob to the left (0) will turn o eects on the associ-
ated channel, while turning the knob to the right will increase
the amount of the selected eect.
LEVEL
This control sets the signal level sent to the main mix.
CLIP
-
nal coming into the channel is too strong, potentially causing
distortion. Turn down the Level control (5) until the Clip light
is no longer present. If you are having diculty getting a clean
signal, try varying the output of the connected device.
SIG
-
ing signal at the input of the channel. If you are having trouble

microphone, instrument or cable that is connected to the channel.
MIC/LINE INPUT
This combination input jack can accept either a 1/4” (balanced or
unbalanced) input or an XLR balanced, low-impedance connec-
tion. The tip is positive on the 1/4” balanced input, and pin 2 is
positive on the XLR.
MIC/HI Z INPUT
Channel 5 line input is a Hi-Z unbalanced input for use with high
impedance microphones, acoustic/electric guitars or other high
impedance sources equipped with a 1/4" plug (TS).
Channel Strip
1
2
4
5
6
7
8
8b
CHANNEL CONTROLS
1
2
4
6
7
5
8
8b
PVi6500.indd 212013-1-31 10:44:08
Loading ...
Loading ...
Loading ...