Gree DUCT24HP230V1AD Slim Duct Indoor Unit with 23800 BTU Cooling Capacity

User Manual - Page 22

For DUCT24HP230V1AD.

PDF File Manual, 31 pages, Read Online | Download pdf file

DUCT24HP230V1AD photo
Loading ...
Loading ...
Loading ...
OPERATION OF WIRELESS REMOTE CONTROLLER
TIMER SETTING
Timer-ON /Timer-OFF BUTTON
To set when you want the unit to turn On at the end of a selected
time period, use the button labeled “Timer-ON /Timer-OFFon the
remote controller. Press this button to make the clock icon disappear,
replaced with the word “ON” (blinking). Press or buttons to
adjust timer setting 1 minute
at a time. Press and hold
or
button to set timer more quickly. Press“Timer-ON /Timer-OFF”
button again to confirm setting, and the word “ON will stop
blinking. To cancel, press“Timer-ON /Timer-OFF button again.
To set when you want the unit to turn Off at the end of a selected time period, use the
same button. Press this button to make the clock icon disappear, replaced with the word
“OFF” (blinking). Adjust settings the same as with
“Timer-ON /Timer-OFF
settings.
NOTE: Under Timer On and Off status, you can set“Timer-ON /Timer-OFF”simultaneously.
Before setting timer, be sure to set clock to correct time.
Timer Setting ON/OFF
SLEEP MODE
The Slim Duct system will automatically adjust room temperature
during your sleep time. This slight change in temperature will not
affect your comfort level due to the natural effects that sleeping
has on the body, but it will save on energy consumption and will
lower your electric bill. Press the SLEEP button to select Sleep
mode or Cancel. The SLEEP icon will appear.
TRADITIONAL MODE - SLEEP
In Traditional Mode the unit will slowly relax the room set temperature
by up to 4 °F until Sleep Mode is cancelled.
In Cool or Dry modes:
The unit will run at current room setpoint for 1 hour. After 1 hour, the setpoint will increase by
2 °F (1). After 2 hours, the setpoint will increase by 4 °F (2) and maintain this setpoint until
Sleep Mode is cancelled.
In Heat mode:
The unit will run at current room setpoint for 1 hour. After 1 hour, the setpoint will decrease by
2 °F (1). After 2 hours, the setpoint will decrease by 4 °F (2) and maintain this setpoint until
Sleep Mode is cancelled.
Sleep Mode Display
21
Loading ...
Loading ...
Loading ...