Loading ...
Loading ...
Loading ...
13
Step 5
5A. Installing the Seat Sliding Tube
Guide the Sensor Wire (41) through the bracket (as shown in Fig. B) while you angle the Sliding
Tube (2) to insert it into the bracket of the Main Frame (1). Connect the Middle Sensor Wire (40)
with the Sensor Wire (41).
Align the bolt holes shown in FIG. A, and insert one Hex Bolt (46). Push the Hex Bolt (46) through
the frame and attach one Round Head Hex Bolt (57). Tighten using the 5mm Allen Wrench with
Phillips Screwdriver and 6mm Allen Wrench provided.
Insert the Safety Pin (47) to align and secure the Main Frame (1) and the Sliding Tube (2).
Further secure the Main Frame (1) and Sliding Tube (2) with one Flat Washer (45) and one
Round Knob (44).
ASSEMBLY
5mm Allen Wrench with
Phillips Screwdriver 1PC
6mm Allen Wrench
1PC
Tool:
(46) Hex Bolt
1PC
(57) Round Head
Hex Bolt
1PC
(45) Flat Washer
1PC
(44) Round Knob
1PC
(47) Safety Pin
1PC
FIG. A
Hardware:
FIG. B
IMPORTANT
Loading ...
Loading ...
Loading ...