Loading ...
Loading ...
Loading ...
10 Eaton Tripp Lite SmartOnline Series User Guide 614-40204—Rev 01
Figure 6. Internal Battery Connection
To connect to the UPS internal battery pack:
1. Connect the two battery connectors.
2. Reinstall the battery protection cover and the front panel, then clip the center cover.
33..77 IInnssttaallllaattiioonn RReeqquuiirreemmeennttss
Eaton recommends the following protective devices and cable cross-sections.
Table 3. Upstream protection
UPS Power rating Upstream circuit breaker
5000VA / 6000VA
D curve — 30A
Table 4. Recommended wire size
Terminal Position Wire Function Terminal Wire Size
Rating
Minimum Input Wire
Size
Tightening Torque
L1 Phase
4-16 mm2 (12-6 AWG)
6 mm2 (10 AWG) 105°
C
10 mm2 (8 AWG) 75°C
10 lb in / 1.13 Nm
Installation Requirements
Loading ...
Loading ...
Loading ...