Loading ...
Loading ...
Loading ...
Eaton Tripp Lite SmartOnline Series User Guide 614-40204—Rev 01 7
Figure 5. BP180RT
Battery power cable, attached with battery
detection cable
Stabilizer bracket (4 screws included)
Rack kit for 19-inch enclosures
EBM Installation manual (Quickstart)
1
2
3
4
1
2
3
4
NOTE 1 Discard the EBM user’s guide if you are installing the EBM with a new UPS at the same
time.
NOTE 2 Use the UPS user’s guide to install the UPS and the EBM.
NOTE 3 If you ordered other UPS accessories, refer to specific user manuals to check the
packing contents.
33..44 TToowweerr IInnssttaallllaattiioonn
Tip If you ordered other UPS accessories, refer to specific user manuals to check the tower installation with
the UPS. The UPS batteries come from the factory disconnected; see Figure 6 to connect the battery pack.
To install the cabinet:
1. Place the UPS on a flat, stable surface in its final location.
2. Always keep six inches or 150 mm of free space behind the UPS rear panel for ventilation.
3. If installing additional cabinets, place them next to the UPS in their final location.
Tower Installation
Loading ...
Loading ...
Loading ...