Loading ...
Loading ...
Loading ...
APPENDIX
Operation
NOTE
• If excessive force is applied to a brush or
foreign matter is caught in the spinning
brush, the brush may stop working to
protect the motor or vacuum. Turn the
vacuum off, remove the foreign matter, and
then turn the vacuum on. If the vacuum
does not start, turn it off and then on again.
• Static electricity may occur depending on
the humidity, temperature, or oor material,
etc. in your home. If it happens repeatedly,
contact a Samsung service center.
• Please charge the battery fully:
– Before using a newly purchased battery
for the rst time or if you haven’t used the
battery for a long time.
– When the battery level indicator is on the
lowest indication and blinks.
• Gently clean the multi-use wet pads by
hand, using a mild detergent.
• The multi-use wet pads can be cleaned using
a washing machine. However, if the wet
pads are exposed to fabric softener or heat
(such as boiling or hot water), they may get
damaged and not work as well.
• Only use genuine Samsung wet pads.
• If the wet brush is used without a wet pad,
any product malfunction will not be covered
by warranty and a service fee will be
charged for repair.
• To purchase additional multi-use wet pads
for the wet brush, contact a Samsung
service center.
• To purchase additional single-use wet pads.
(*Make sure to check the model name VCA-
SPA90.)
CAUTION
• When the spinning brush inside a brush is
working, do not touch the brush.
– Otherwise, your hand can be caught and it
may cause an injury.
• Before using the wet brush, detach the wet
pad and put some water on it, then reattach
it to the spin disk.
• Do not use the vacuum cleaner on items that
can be scratched (TV and monitor screens,
etc.)
Maintenance
NOTE
• Sometimes the wheel of a brush can scratch
the oor. Before using the vacuum cleaner,
check the wheels of the brush.
– If there is foreign matter on the wheel of
the brush which cannot be removed easily,
contact a Samsung service center.
• If the inner part of the wet brush is clogged
with a large foreign matter, spinning speed
decreases or stops.
CAUTION
• Storing the vacuum cleaner in sunlight for
long hours may cause parts of the vacuum
to deform or discolor. Therefore, after
cleaning the parts of the vacuum cleaner,
dry them in the shade.
• Do not clean the brush of the vacuum
cleaner with water. Cleaning it with water
can cause the brush to deform or discolor.
• Before cleaning the wall mount, you must
unplug the wall mount.
• If you notice a continuous reduction in
suction or the vacuum cleaner overheats
abnormally, replace the Fine dust lter.
• After cleaning <a dustbin>, <a metal mesh
grille lter>, or <a washable micro lter>
with water, dry in the shade.
– When heat is applied, product
malformation may occur.
English
21
2022-07-06 오전 6:34:21
Loading ...
Loading ...
Loading ...