Loading ...
Loading ...
Loading ...
INSTALLATION
Installing the wall mount
CAUTION
• Install the wall mount on a hard concrete
wall.
– If you install the wall mount into drywall
and there is no stud present, use the
drywall anchors to secure the charger.
#1
Connecting the cable
• To disassemble the wall mount, follow steps
in reverse order.
#2
Positioning the wall mount
01
The wall mount installation should be set
so the top of the wall mount is 113cm
(441/2in)from the oor.
02
Using the wall mount as a template, mark
where the screw holes will be placed.
03
Drill the holes to a depth of 50mm (2in)
using a 6mm (1/4in) drill bit, and put the
provided screw anchors into the hole.
04
Fix the wall mount to the wall with the
provided screws.
05
Plug in the wall mount, place the vacuum
into the wall mount, and then conrm that
the battery level indicator is displayed.
❇ Please refer to the QR code for
detailed information on the
installation of the wall mount.
Installation
INSTALLATION
Product Specication
Model VS20T755*** / VS20T751***
Power 100-240 V~ 50-60Hz
Rated 550W
Battery specication Lithium-ion 21.6 V, 1800 mAh, 6 cell
Charging time 3.5 hours
Cleaning time
(Default : MID)
Handy
Approximately 3 minutes (JET) / Approximately 5 minutes (MAX) /
Approximately 30 minutes (MID) / Approximately 60 minutes (MIN)
Turbo Action
Brush
Approximately 5 minutes (JET) / Approximately 9 minutes (MAX) /
Approximately 18 minutes (MID) / Approximately 27 minutes (MIN)
Soft Action
Brush
Approximately 5 minutes (JET) / Approximately 9 minutes (MAX) /
Approximately 18 minutes (MID) / Approximately 27 minutes (MIN)
❇ Charging and cleaning time may differ depending on the brushes and the conditions of use.
English
11
2022-07-06 오전 6:34:16
Loading ...
Loading ...
Loading ...