Bertazzoni DW24T3IXT 24 Inch Fully Integrated Built-In Dishwasher

User Manual - Page 40

For DW24T3IXT.

PDF File Manual, 154 pages, Read Online | Download pdf file

DW24T3IXT photo
Loading ...
Loading ...
Loading ...
USE
5) Press the Half Load button again to save desired level:
the newly selected level will stop flashing
6) Exit Menu settings by pressing the Extra Dry button for 3
seconds or turn the machine off.
The factory setting is “4”.
NOTE
If the dishes are not drying properly or are
spotted, increase the level. If blue stains
form on your dishes, decrease the level.
LEVEL
BRIGHTENER
DOSE
INDICATOR
1
Rinse-aid not
dispensed
r:1 is shown on
the display.
2
1 dose is
dispensed
r:2 is shown on
the display.
3
2 doses are
dispensed
r:3 is shown on
the display.
4
3 doses are
dispensed
r:4 is shown on
the display.
5
4 doses are
dispensed
r:5 is shown on
the display.
SALT DISPENSER (FOR MODELS WITH
WATER SOFTENER)
Please check the salt indicator on the control panel to see
whether there is enough softening salt in the dishwasher.
The salt dispenser must be refilled with salt whenever the
salt warning indicator appears on the control panel of your
machine.
FILLING THE DISHWASHER SALT DISPENSER
WARNING
Cooking and table salts do not dissolve in
water easily, using these kinds of salts will
damage the water softener system of your
machine.
NOTE
The machine can only use special
dishwasher salt to soften the water. Do not
use any small-grained or powder-type salts
which are easily soluble. Using any other
type of salt can damage your machine. The
manufacturer is not liable for damages
resulting from using the wrong type of salt.
WARNING
Dishwasher detergent will damage the
softener assembly. Do not fill the salt
container with dishwasher detergent.
WARNING
If the water in your area is very soft and
consistently lower than 5 gpg (9 °f) you do
not have to add dishwasher salt.
Fig. 66
1) To fill the dishwasher with salt, first remove the lower
basket and then open the salt compartment cap by
turning it counterclockwise. (Fig. A-B)
2) First, fill the compartment with 1 kg salt and water (Fig.
C) to the overflow level. If available, using the funnel
(Fig. D) provided will make filling easier.
3) Refit the cap and close it.
WARNING
If the softener salt has overflowed and you
do not start the machine immediately, run a
short washing program to protect your
machine against corrosion.
NOTE
Fill the salt compartment with water only
the first time you fill the salt compartment.
NOTE
If the salt warning lamp on the control panel
lights up, fill the salt compartment with salt
again.
WARNING
Use softener salt specifically made for use
in dishwashers.
A
C
B
D
40
Loading ...
Loading ...
Loading ...