Loading ...
Loading ...
Loading ...
42
What to Do?
Long Periods of Disuse
If the toilet is in a location you will not visit for a long time, drain the water.
(The water in the tank may cause malfunctions or become contaminated and cause skin irritation or other problems.)
How to drain the water
1
Drain the water from the toilet tank.
(Page 41 Step
1
,
2
)
2
Press
"Wand CLEAN" button.
(Release the pressure from the water supply
pipe.)
3
Unplug the power plug.
4
Drain the pipe.
(Page 41 Step
5
)
5
Pull out the water drain lever.
•
Water comes out from
around the wand
(about 20 seconds)
6
Release your hand to return the
water drain lever to its original
position.
■
If water may get frozen
•
Add antifreeze solution in the water in the bowl to
prevent freezing.
(The antifreeze solution should not be fl ushed out.
Collect it before using the toilet and dispose of it.)
■
To use the product again
•
The water needs to be resupplied. (See below)
Water drain lever
Resupplying the Water
1
Open the shutoff valve. (P.15)
•
Check that water is not leaking from a pipe or the main unit.
2
If the power is not on, insert the power plug.
•
The "Power" LED lights up.
3
Discharge water from the wand.
(1) Pressing down the left side of the toilet seat,
(2)
Press "Rear cleansing" button on the remote control to
discharge water from the wand.
•
Catch the water in a paper cup or other receptacle.
(3) Press "Stopping" button.
■
If the remaining water has frozen and no water comes out
•
Heat the inside of the bathroom, and warm the water supply hose and shutoff valve using a cloth
soaked in warm water.
Soft cloth soaked in water
(to prevent scratching)
Paper cup
Loading ...
Loading ...
Loading ...