Loading ...
Loading ...
Loading ...
ASSEMBLY
The grass trimmer is supplied with some components not assembled.
To assemble these proceed as follows:
ASSEMBLING THE MOTOR HOUSING
Insert the motor housing (6) into the handgrip (5), make sure the cable
between will not be damaged.
ASSEMBLING THE HANDLE
Install the handle (4) onto the handgrip (5) with bolt and nut.
MOUNTING THE GUARD
Align the reference indices of the body (2) of the spool holder (3) and
of the guard (4). Insert the guard in the body (up to the collar) and
rotate it in the direction indicated by the arrow until the hole of the
guard corresponds to that of the body. Firm the screws supplied (1).
CAUTION: During this operation beware of the line cutter blade.
You may be wounded.
CAUTION: Never use the grass trimmer without the guard. It is vital
for your and other peoples’ safety and for the good working order of
the trimmer. The failure to observe this safety regulation is not only
dangerous but also annuls the guarantee terms.
MOUNTING THE GUARD
Align the reference indices of the body (2) of the spool holder (3) and
of the guard (4). Insert the guard in the body (up to the collar) and
rotate it in the direction indicated by the arrow until the hole of the
guard corresponds to that of the body. Firm the screws supplied (1).
CAUTION: During this operation beware of the line cutter blade.
You may be wounded.
CAUTION: Never use the grass trimmer without the guard. It is vital
for your and other peoples’ safety and for the good working order of
the trimmer. The failure to observe this safety regulation is not only
dangerous but also annuls the guarantee terms.
8
Loading ...
Loading ...
Loading ...