Tripp Lite PDUMH30HVNET Owner's Manual

Loading ...

Installation

Networking the PDU

For network configuration instructions, please refer to the WEBCARDLX owner’s manual

(PN 93358E) included with this product.

Output Receptacles: These receptacles distribute AC power to connected equipment.

When a receptacle is live, the associated green LED is illuminated.

Features

Primary AC Input Power Cord: Connect the input plug to a compatible AC power outlet.

The cord is permanently attached to the PDU.

Digital Load Meter (Ammeter): The digital load meter

displays the load in amps. It may be set using the Meter

Select switch to display the PDU's total connected load (all

16 outlets-both LEDs illuminated), or the load carried by

either the upper bank (Bank 1 LED illuminated) or lower

bank (Bank 2 LED illuminated) of 8 outlet receptacles. For

models with SNMP Network Card installed, press and hold

the switch to display the IP address of the SNMP card in

the PDU.

208/230V IEC 60320 C13

Output Receptacles

(PDUMH30HV19NET,

PDUMH30HVNET &

PDUMH32HVNET)

208/230V IEC 60320 C19

Output Receptacles

(PDUMH30HV19NET)

L5-30P Input Plug: 120V,

(PDUMH30NET)

IEC 309 3-Pole Input Plug:

208/230V, (PDUMH32HVNET)

L6-30P Input Plug: 208/230V,

(PDUMH30HVNET &

PDUMH30HV19NET)

120V NEMA 5-15/20R Output

Receptacles (PDUMH30NET)

Meter Select

Bank 2

Bank 1

LOAD (AMPS)

Loading ...

Tripp Lite PDUMH30HVNET 5.5kW Single-Phase Switched PDU - LX Interface, 208/230V Outlets 16 C13, L6-30P Input, 12 ft. 3.66 m Cord, 2U Rack-Mount, TAA