Tripp Lite PDUMH30HVNET 5.5kW Single-Phase Switched PDU - LX Interface, 208/230V Outlets 16 C13, L6-30P Input, 12 ft. 3.66 m Cord, 2U Rack-Mount, TAA

Owner's Manual - Page 2

For PDUMH30HVNET. Also, The document are for others Tripp Lite models: PDUMH30NET, PDUMH30HV19NET, PDUMH32HVNET

PDF File Manual, 36 pages, Read Online | Download pdf file

PDUMH30HVNET photo
Loading ...
2
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed
during the installation, operation, and storage of this product. Failure
to heed these instructions and warnings will void the product warranty.
CAUTION Only those who are properly trained or qualified to use this device should
do so. Anyone who is not trained or qualified should not use this device unless it is under
the supervision of someone who is properly trained or qualified to do so.
Children must be supervised to ensure that they do not use the device as a toy.
Never use the device if the cord and plug are damaged; if it is not working properly,
or if it has been dropped or damaged, take it to an authorized service center for inspection
and repair.
If the power cord is damaged, it must be replaced by the manufacturer, its authorized
service agent, or by qualified personnel in order to avoid a danger.
Important Safety Instructions
The PDU provides the convenience of multiple outlets, but DOES NOT provide surge
or line noise protection for connected equipment.
The PDU is designed for indoor use only, in a controlled environment, away from
excess moisture, temperature extremes, conductive contaminants, dust or direct
sunlight.
Keep indoor ambient temperature between 32°F and 104°F (0°C and 40°C).
The PDU must be installed by a qualified technician only.
Do not attempt to mount the PDU to an insecure or unstable surface.
Install in accordance with National Electrical Code standards. Be sure to use the
proper overcurrent protection for the installation, in accordance with the plug/
equipment rating.
Connect the PDU to an outlet that is in accordance with your local building codes
and that is adequately protected against excess currents, short circuits and earth
faults.
The plug on this PDU serves as the disconnect device. Make sure the electrical
outlet supplying power to this equipment is installed near the equipment and easily
accessible.
Do not connect the PDU to an ungrounded outlet or to extension cords or adapters
that eliminate the connection to ground.
Be sure to provide a local disconnect device on any models that are permanently
installed without a plug that is easily accessible.
Never attempt to install electrical equipment during a thunderstorm.
Individual equipment connected to the PDU should not draw more current than the
individual PDU’s outlet’s rating.
The total load connected to the PDU must not exceed the maximum load rating for
the PDU.
Do not attempt to modify the PDU, input plugs or power cables.
Do not drill into or attempt to open any part of the PDU housing. There are no user-
serviceable parts inside.
Do not attempt to use the PDU if any part of it becomes damaged.
Use of this equipment in life support applications where failure of this equipment
can reasonably be expected to cause the failure of the life support equipment or to
significantly affect its safety or effectiveness is not recommended.
Loading ...
Loading ...
Loading ...