7.Replace the drain plug well in position. Wash the ice basket and ice scoop in warm soapy water.
Rinse and dry.
8.Clean the exterior of the ice maker with a soft damp cloth. Use a mild dishwashing soap, if
necessary.
To keep your ice tasting fresh and your ice maker looking great, we recommend cleaning
your ice maker once per week.
1.Stop the ice-making cycle by pressing the “ ” key, unplug the ice maker from the wall outlet and
allow it to warm up to room temperature.
2.If residual water is found in the ice tray, gently push the ice tray back so that all water drains into
the water reservoir.
3.Move the appliance forward to a place 60mm away from the working table and open the drain
plug to drain out excess water (see Fig.1, Fig.2 and Fig.3).
4.Check and make sure the drain plug must be closed well. Fill the water reservoir with clean
water, press‘’until the ‘ ’ indicator flashes,then press the “ ” key , the pump will start to pump water
and keep running for 6 minutes, and it will enter into standby condition after running for 6 minutes,
finally, open the drain plug and empty the water.
5.Remove the ice basket.
6.Clean the ice maker interior with a soft cloth soaked with warm water and vinegar, then rinse with
clean water and then drain all the water.
