Please register this product at
www.conair.com/registration
Service Center
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
For information on any Conair or InfinitiPRO by Conair
product, call 1-800-3-CONAIR or visit us
on the web at www.conair.com/infiniti
©2020 Conair Corporation
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
20PA076261
LIMITED THREE-YEAR WARRANTY
(U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your
unit free of charge for 36 months from the
date of purchase if the appliance is defective
in workmanship or materials. To obtain service
under this warranty, return the defective product
to the service center listed, together with your
purchase receipt. California residents need
only provide proof of purchase and should call
1-800-3-CONAIR for shipping instructions. In
the absence of a purchase receipt, the warranty
period shall be 36 years from the date of
manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS,
OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE 36-MONTH DURATION OF
THIS WRITTEN, LIMITED WARRANTY. Some
states do not allow limitations on how long an
implied warranty lasts, so the above limitations
may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF
THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER.
Some states do not allow the exclusion or
limitation of special, incidental, or consequential
damages, so the above limitation may not apply
to you.
This warranty gives you specific legal rights,
and you may also have other rights, which vary
from state to state.
IMPORTANT
Never immerse this product in water
or any other liquids.
IF YOU MUST USE YOUR HOT AIR STYLER IN
THE BATHROOM, INSTALL A GFCI* NOW!
Your local electrician can help you decide
which type is best for you – a portable unit that
plugs into the electrical outlet or a permanent
unit installed by your electrician. The National
Electrical Code now requires GFCIs in the
bathrooms, garages, and outdoor outlets of all
new homes.
WHY DO YOU NEED A GFCI? Electricity and
water don’t mix. If your hot air styler falls
in water while it’s plugged in, the electric
shock can kill you...even if
the switch is off. A regular
fuse or circuit breaker won’t
protect you under these
circumstances. A GFCI offers
you far greater protection.
A GFCI can save your life! Compared to that,
the price is small! Don’t wait...install one
now!
* GFCI is a sensitive device that reacts
immediately to a small electric current leak
by stopping the electricity flow.
This message about...
G
ROUND
F
AULT
C
IRCUIT
I
NTERRUPTERS
...can save a life!
CAUTION
NEVER allow the power supply cord to be pulled,
twisted, or severely bent. Never wrap the cord
tightly around the hot air styler. Damage will
occur at the high flex point of entry into the hot
air styler, causing it to rupture and short circuit.
Inspect the cord frequently for damage. Stop
use immediately if damage is visible or unit
stops or operates intermittently.
If the cord or hot air styler is damaged or does
not operate properly, return it for repair to an
authorized Conair service representative only.
No repairs should be attempted by the
consumer.
STORAGE – IMPORTANT
When not in use, your hot air styler should be
disconnected, allowed to cool and stored in a
safe, dry location, out of reach of children. Do
not wrap line cord around hot air styler. Allow
the cord to hang or lie loose and straight at the
point of entry into the hot air styler.
CLEANING &
MAINTENANCE
• Unplug the appliance and let cool completely
before cleaning it.
• Use a damp cloth to clean carefully. Make
sure the appliance is completely dry before
using again.
• The rear filter should be cleaned on a regular
basis using a soft brush to help prevent buildup
and overheating. This will also prolong the
motor life.
USER MAINTENANCE
Your hot air styler is virtually maintenance free.
No lubrication is needed. For proper operating
performance, the hot air styler must be kept
clean. When cleaning is needed, unplug the
cord, allow to cool and clean dust and lint
from air intake openings with a small brush
or the brush attachment of a vacuum cleaner.
The outer surface of the hot air styler should
be wiped clean with a cloth only. Blocked or
clogged air intake vents will cause the hot
air styler to overheat. If overheating occurs,
an automatic safety device will shut the hot
air styler or the heat off to prevent damage or
personal injury. If the unit or the heat turns off,
unplug the cord and allow the hot air styler to
cool for 10 to 15 minutes before restarting.
Make sure the air vents are clean.
BEAUTY TIPS
To achieve the looks you love and for more
great InfinitiPRO by Conair
®
products, visit infiniti.conair.com
IB-17077
WITH
®
model BC120 – all versions
ALL-IN-ONE SMOOTHING
DRYER BRUSH
INSTRUCTIONS
AND STYLING
GUIDE
For your safety
and continued
enjoyment of
this product,
always read the
instruction book
carefully before
using.
Loading ...
Loading ...
Loading ...
