Loading ...
Loading ...
Loading ...
29
Adjusting the Rated Current
The MaxiCharger AC Wallbox Home allows you to manually set a lower maximum current
using a current selector when installing your charger on a circuit rated lower than the
maximum rating for your charger.
1. Remove the covers and locate the current selector.
2. Use a flathead screwdriver to set the rotary switch to the appropriate position per the
diagram below.
Position Amperage (A) Circuit Breaker Rating
0 Not in Use N/A
1 16 20
2 24 30
3 32 40
4 40 50
5 48 60
6 50 70
7 Not in Use N/A
8 Not in Use N/A
9 Not in Use N/A
NOTE
When the rotary switch is at 0, 7, 8 or 9, the corresponding amperage will still be
16, 50, 50, and 50, respectively.
The maximum current is limited by the power rating of a charger as follows:
— For 7 kW model: 32 A
— For 9.6 kW model: 40 A
— For 12 kW model: 50 A
3. When the current of your charger is set lower than the maximum rating, choose the
correct current value from the Amperage Labels and affix it over the existing label on the
charger.
Loading ...
Loading ...
Loading ...