Loading ...
Loading ...
Loading ...
Fit the protective film
Affix the protective film (packed in the document bag). The protective film is to protect the countertop
from moisture.
NOTE!
The surface to which the protective film is fitted must be clean and dry.
Adjust the height and slide the dishwasher into place
1. Start by measuring the height from the floor to the bottom edge of the countertop.
2. Measure the height from the floor to the top edge of the dishwasher.
3. Adjust the front feet by turning them clockwise to raise and counterclockwise to lower the
dishwasher.
Lean the dishwasher forward a little and adjust the rear foot with the screw at the front of the
dishwasher. Turn clockwise to lower or counterclockwise to raise.
4. Verify there is an air gap of at least 0.1" (3 mm) between the underside of the countertop and the
top edge of the dishwasher.
5. Slide the dishwasher into place.
• Pull the drain and supply hoses through the opening as the dishwasher is slid into place.
• Check that the hoses have no kinks or sharp bends, and check that there is nothing that can
damage the hoses.
• Check that the machine is installed such that the door opens freely, otherwise door lock
functionality may be disrupted.
6. Make any final adjustments to the front feet (the dishwasher may lean no more than 0.2" (5 mm)).
30
Loading ...
Loading ...
Loading ...