Loading ...
Loading ...
Loading ...
PROGRAM - Select program
Press the Program selector one or more times until the desired program symbol is activated.
Auto Wash
The dishwasher can measure how dirty the dishes are and adjust water consumption and temperature
accordingly. When newly installed, the program needs to be run five times before it is fully adapted
and can provide the best results.
+ + QuickIntensive
1)
QuickIntensive (Auto Wash + SpeedWash + Auto open) is an effective program for slightly dried
leftovers. (This program is not intended for burnt food, such as on oven dishes.)
Pots+Pans
A program with a high temperature to dissolve grease on heavily soiled dishes, such as pans, casserole
dishes, and oven dishes. If these dishes do not completely fill the dishwasher, you can add plates and
other dishes.
Combine the Pots+Pans program with the Sanitize option to meet the performance requirements of
the NSF/ANSI 184 standard.
Normal Wash
This program is recommended for daily, regular, or typical use to completely wash a full load of normally
soiled dishes, such as plates, serving dishes, cups, and glasses.
Quick Wash
This program is used for glasses and porcelain that is lightly soiled, such as coffee cups.
In combination with SpeedWash, a shorter program is achieved (15 minutes).
Rinse+Hold
Use to rinse dishes while you wait for the dishwasher to become fully loaded.
Self Clean
Self-cleaning program for sanitizing the dishwasher tub, spray arms, and spray pipes.
This program should be run (with no dishes in the machine) using regular dishwasher detergent or
citric acid. Special dishwasher cleaners are also available in stores. For the removal of limescale
deposits, see Dishwasher tub in the chapter Care and maintenance instructions.
Press and hold the option buttons for Self Clean
to activate the program. Self Clean starts when
the door is closed.
Self Clean
1)
Program time 90 minutes.
13
Loading ...
Loading ...
Loading ...