Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
92
Electrical connection
The dishwasher is supplied with a
mains cable with moulded plug ready
for connection to an earthed socket.
The socket must be easily accessible
after the dishwasher has been installed.
If the switch is not accessible after
installation, an additional means of
disconnection must be provided for all
poles.
Risk of fire from overheating.
Connecting the dishwasher to a
multi-socket plug adapter or to an
extension lead can overload the
cable.
Do not use an extension lead or
multi-socket plug adapter.
The electrical installation and all
electrical work must be carried out by a
suitably qualified and competent person
in strict accordance with national and
local safety regulations. For extra
safety, it is advisable to install a residual
current device (RCD) with a trip current
of 30 mA. Ensure power is not supplied
to the appliance until after the
installation has been completed.
Connection should be made via a
suitable switched socket.
If the mains connection cable is
damaged, it must only be replaced with
a specific mains connection cable of
the same type (available Miele). For
safety reasons, such replacement may
only be carried out by a suitably
qualified and competent technician or
by a Miele authorised service
technician, in order to avoid a hazard.
For technical data, see the data plate
located on the right side of the door.
Compare this information with the data
of the on-site electrical connection.
If in any doubt, consult a qualified
electrician.
Do not connect the dishwasher solely
to a stand-alone inverter such as those
used with an autonomous energy
source (e.g. solar power). When the
dishwasher is switched on, power
surges could result in a safety switch-
off. This could damage the electronics.
Temporary or permanent operation with
a self-sufficient or non-mains
synchronous energy supply system
(e.g. isolated networks, back-up
systems) is possible. A requirement for
the operation is that the energy supply
system complies with all current local
and national requirements that apply to
stand-alone, solar and/or battery
systems.
The protective measures provided in
the domestic installation and in this
Miele product must also be assured in
their function and operation in isolated
operation or in non-mains synchronous
operation, or replaced with equivalent
measures in the installation.
Loading ...
Loading ...
Loading ...