Loading ...
Loading ...
Loading ...
PAGE: 5 / 10
Thread the motor wires through the
downrod stand cover, decorative
cap (Making sure the smooth side
of decorative cap is facing
downward.), canopy and downrod.
Collar
Downrod
Downrod
Hanger Pin
Collar Screws
Lock Pin
Installation Steps :
Hanger Pin
Downrod
Lock Pin
Attach the hanger bracket to the outlet
box with two mounting screws. (To reduce
the risk of fire, electric shock, or personal
injury, mount to an outlet box marked
"Acceptable for fan support" and use
mounting screws provided with the outlet
box.)
Note: For sloped ceiling installation, make
sure that the chip of the hanger bracket
is toward the floor.
Hang the fan on hanger bracket, and
make sure the slot of hanger ball is
snapped into the chip of hanger
bracket exactly.
Note: For sloped ceiling installation,
make sure the slot of hanger ball and
the chip of hanger bracket face down.
Fig.1
Turn OFF the electric circuit at the
main fuse or circuit breaker box.
Remove the lock pin from hanger
pin and remove the hanger pin
from the downrod.
Fig.3
Loosen the collar screws out part way.
Insert the downrod into the collar.
Slide hanger pin through holes of
collar and downrod.
Fig.4
Motor Wires
Downrod Stand
Cover
Decorative Cap
Canopy
Tighten the two collar screws. Slide
lock pin into hanger pin until it is
locked into position.
Fig.6
Fig.7
Slot
Chip
Hanger Bracket
Collar
Hanger
Bracket
Fig.2
Outlet Box
Canopy
Decorative Cap
Downrod Stand
Cover
Fig.5
NOTE: The fan weight is 15.87 lbs (7.2kgs). Be sure the outlet box you are using is securely attached to the building
structure and can support the full weight of the fan. Failing to do so can result in serious injury.
INSTALLATION INSTRUCTIONS
IMPORTANT:
BEFORE YOU BEGIN INSTALLING THE FAN,
SAVE ALL INSTRUCTIONS.
Chip
CAREFULLY READ ALL INFORMATION PROVIDED IN
THE SAFETY INSTRUCTIONS AND INSTALLATION INSTRUCTIONS. IF IN DOUBT, CONSULT A
QUALIFIED ELECTRICIAN.
220607
Loading ...
Loading ...
Loading ...