Loading ...
Loading ...
Loading ...
4
5
BATTERY & KEY ACCESS
Install Battery
1. The battery cover is located on the
bottom edge of the keypad. Remove
the cover by pulling on the tab.
2. Carefully insert one new 9V alkaline
battery into the battery compartment.
Don’t force the battery into the
compartment.
NOTE: Don’t pull the battery connector to
avoid pulling wires out of housing.
3. Reinstall the battery cover.
Key Access
The key access is concealed yet and
easy to access in case of an emergency
or forgotten PIN code.
*NOTE: Before you start to use the safe, test the emergency keys and store them in
a secure place, NOT inside of the safe.
PARTS OF THE SAFE 1. Use a Phillip’s Head screw driver to remove the screw on the top of keypad cover.
2. Carefully remove the keypad cover from the housing. Let the keypad cover hang
with the wires still attached.
3. Locate the keypad access inside of the housing. Insert the key into key slot and
turn clockwise to open safe.
A. Handle
B. Indicator Lights
C. Key Pad
D. Battery Compartment
(located behind key pad)
E. Emergency Key Access
(located behind key pad)
Loading ...
Loading ...
Loading ...