Loading ...
2
3
Read all instructions before using this safe.
WARNING
- For security purposes, change the factory default Master Code as soon as possible.
Factory default Master Code is: 12345678
- The Master Code should always be held by the owner of the safe or
authorized people. If the Master Code is forgotten, the user is unable to
change new Master Code, Activate/ Delete Users, set up Single/Dual Entry
Modes, and set up Time Delay Mode.
- Test registered pin codes a few times before closing the door.
- Test and store emergency keys in a secure place; NOT inside of the safe.
- Be careful when opening and closing the depository slot.
- Keep children away from safe; they should not play with or around the safe at
any time.
- Always make sure the safe is locked before walking away. Avoid leaving the safe
door open and unattended; it will allow unauthorized individuals to reprogram the
safe, gaining full access to the safe and its contents.
- Test and make sure the safe works properly before mounting. Once tested, mount
the safe before use.
NOTE: Barska is not responsible for any installation damages and any lost or
stolen contents.
CONTENTS
Warnings 3
Parts Of The Safe 4
Battery and Key Access 4
Changing the Master Code 6
Register User Code 6
Change User Code 7
Delete User Code 7
Setting Single User and Dual User Mode 7
Opening and Locking Safe with User Code /Master Code 8
Lock Out Mode 8
What’s the Time Delay Feature 8
Setting Time Delay 9
How To Activate Safe In Time Delay Mode 9
Low Battery Warning 9
Trouble Shooting 10
Care And Maintenance 10
Mounting Instructions 10
Warranty 11
Loading ...
Loading ...
Loading ...