Loading ...
Loading ...
Loading ...
10 11
When the unit is on, press or on the heater
/ remote control to adjust the temperature from 41
to 95°F in 1°F increments.
When the unit is on, press on the heater /
remote control to cycle through 00 -> 01 -> … -> 12
-> 00 -> 01 hour timer.When time is up, the unit will
automatically stop running.
When the unit is on, press on the heater /
remote control to start oscillating.
If no operation is done within 1 minute when
powered on, the display will turn off automatically
（
Only the power indicator light + working mode
light should be on).
To turn the display back on, press any button to
wake it up.
To stop oscillating, press it again.
To cancel Timer setting, press and hold on the
heater for 3 seconds, or adjust the timer setting
to 00, or turn the unit off.
When the setting temperature (T0) is reached,
the heater will stop working and enter standby
mode (with 30-second delay). When the room
temperature is lower than the set one (T0), the
heater will start working again.
Temperature Adjustment
Auto OFF Timer
Oscillation Button
Auto LED Display OFF
Memory
Function
The heater is designed with power off memory
function, the heater will always remember
your last settings (temperature & working
mode oscillation status) once you turn it on
again.
24-Hour
Auto Shut
Off
When the heater has been working for
24 hours continuously without any other
operation, it will shut off automatically.
Tip-Over
Protection
When the heater is tipped over, the heater will
shut off automatically with malfunction code
“P4” on LED display and beeps.
Place the heater back on a flat, level and
stable surface.Turn it on again.
Overheat
Protection
When the ambient temperature is above 122°F,
the heater will stop heating and the overheat
alarm will be triggered with malfunction code
“FF” on LED display and beeps.
Please unplug it from the power source
and power it on again when the ambient
temperature drops below 122°F.
Other Features
Loading ...
Loading ...
Loading ...