Loading ...
Loading ...
Loading ...
8 9
Control Panel
Remote Control
Note: For added convenience, the same control buttons
can be found on the remote control.
Power ON/OFF
Temperature+Temperature-
Mute / UnmuteMode / Heat level
TimerOscillation
Operations and Functions
Place the heater on a firm, level surface free from
obstructions, and at least 3ft. (0.9m) away from any wall or
combustible material. Plug into an appropriate voltage AC
120V outlet, the unit will enter standby mode with a beep and
power indicator on red. Your heater is ready for use now.
Press on the heater / remote control once to turn
the heater ON with default settings: Power indicator
on red, default temperature “95°F” & high heat level
“HI” on LED display.
The RED indicator (Power ON indicator) lightens when
the Heater is switched on.
When the unit is on, repeatedly press on the
heater / remote control to cycle through High (HI)
->Low (LO) -> ECO -> High (HI) modes.
Hold the MODEL button for 3 seconds or press
the mute button on the remote control to turn the
buzzer on or off. The HI LO and ECO will flash once
along with a beep sound.
Press once again to turn the heater OFF with
15-second delay and countdown time on the display.
When ECO mode is turned on, the heater will adjust
the working mode (High or Low) automatically based
on the ambient temperature.
Both “ECO” and “HI” / “LO” will light up on the LED
display.
You can also adjust the temperature by pressing
or .
Power ON/OFF
Mode / Heat Level Setting
Mute / Unmute
ECO Mode
Loading ...
Loading ...
Loading ...