Napoleon BILEX485RBPSS-1-CE User Manual

Loading ...

www.napoleon.com

N415-0562CE-GB-DE MAR 11.22

CAUTION! Check for abrasions, melng, cuts, and cracks in the hose. If any of these condions

exist, do not use the gas grill. Have the part replaced by your Napoleon Grill dealer or qualied gas

installer.

Burner: The burner is made from heavy wall 304 stainless steel, but extreme heat and a corrosive

environment can cause surface corrosion to occur. This can be removed with a brass wire brush.

CAUTION! Beware of Spiders.

Spiders and insects are aracted to the smell of propane and natural gas. The burner is equipped with an

insect screen on the air shuer, which reduces the likelihood of insects building nests inside the burner

but does not enrely eliminate the problem. A nest or web can cause the burner to burn with a so yellow

or orange ame or cause a re (ashback) at the air shuer underneath the control panel. To clean the

inside of the burner, it must be removed from the gas grill: Remove the screw (s) that aaches the burner

to the back wall. Slide the burner back and up wards to remove. Cleaning: Use a exible venturi tube brush

to clean the inside of the burner. Shake any loose debris from the burner through the gas inlet. Check the

burner ports and valve orices for blockages. Burner ports can close over me due to cooking debris and

corrosion, use an opened paperclip or the supplied port maintenance bit to clean them. Drill out blocked

ports using this drill bit in a small cordless drill. The ports are easier to clean if the burner is removed from

the grill, but it can also be done with the burner installed. Do not ex the drill bit when drilling the ports,

as this will cause the drill bit to break. This drill is for burner ports only, not for the brass orices (jets)

which regulate the ow into the burner. Take care not to enlarge the holes. Ensure the insect screen is

clean, ght, and free of any lint or other debris.

Reinstallaon: Reverse the procedure to reinstall the burner. Check that the valve enters the burner when

installing. Replace sear plate mount and / or ghten screws to complete reinstallaon.

WARNING! When reinstalling the burner aer cleaning it is very important

that the valve/orice enters the burner tube before lighng your gas grill. If the

valve is not inside the burner tube a re or explosion could occur.

Loading ...

Napoleon BILEX485RBPSS-1-CE Grill Head